DEMON EVO PLUS SELF FIT MOTORCYCLE SCOOTER ALARM WITH TWO TRANSPONDERS LOW DRAW

DEMON EVO PLUS SELF FIT MOTORCYCLE SCOOTER ALARM WITH TWO TRANSPONDERS LOW DRAW
mouse over to zoom +
In Stock
This item is not held in stock but we're happy to order it for you. Please click here and we'll contact you to arrange this.
Price: £124.95
Quantity:
DESCRIPTION


Demon Evo Plus 'Self Fit' Alarm/Immobiliser System

Datatool Demon Evo Plus (Pt No: 020300146) - Upgrade model to the Demon Uno Alarm

 

Designed for installation either by a competent home mechanic or your local motorcycle dealer, the Datatool Demon Evo Plus provides an increased level of security over a standalone alarm but without the complexity and cost of a full Thatcham Category 1 approved system.

 

* Easy fit, movement sensing and voltage sensing alarm system & immobiliser

* Single circuit immobiliser

* LED status light provides visual deterrent

* Supplied with 2 remote transmitters

* Movement sensitivity adjustable via remote control

* PIN override capability, factory programmed code
 
* Panic Mode to sound alarm from remote control
 
* Bike Finder feature to flash indicators via remote control
 
* Storage mode
 
* Low current draw

* 24 month warranty 

The Datatool Demon Evo Plus is an easy to fit alarm/single circuit immobiliser system designed for motorcycles and scooters with a 12v battery. Using a sophisticated movement sensor, the Demon Uno Plus constantly monitors for signs of unauthorised movement, triggering the loud integrated siren when the movement exceeds the permitted level. The movement sensor can be adjusted via the remote control to one of three levels to customise the alarm to your preference. Additionally the system provides further protection thanks to the single circuit immobiliser protecting against hotwire/forced ignition.

The Demon Evo Plus also monitors the battery voltage, triggering the alarm if the voltage rises suddenly indicating the engine has been started and also provides visual notification of a low battery by reducing the flash rate of the deterrent LED. 

In addition to adjustable movement sensitivity and single circuit immobiliser, the Demon Evo Plus also features: 

* Transport Mode: Ability to arm without movement sensing if the bike or scooter is being transported.

* Storage Mode: Disables the alarm when your motorcycle is put away for long periods of time in storage.

* Alarm Diagnostics: If the alarm has triggered whilst you were away, the Demon Evo will bleep a code to  tell you which input caused the trigger.

* Automatic Rearm: With this optional feature enabled, the Demon Evo will rearm automatically if the alarm is disarmed and the engine isn’t started within 30 seconds.

* Arm/Disarm Tones: Another optional feature, the Demon Evo can be programmed to ‘chirp’ on arm and disarm and there are 2 options on the ‘chirp’ volume. Note: Certain countries including the UK require alarms to arm/disarm silently, check legislation for your country.

* Optional Seat Switch / Luggage Loop: Separate trigger wire which can be used in conjunction with a magnetic seat switch or inline connector to extend the level of protection. 

The Datatool Demon Evo Plus is supplied pre-wired with an inline fuse and terminals ready to connect direct to the vehicle battery and the LED is a plug-in connection meaning no soldering is required to install. In addition to the deterrent effect of the LED, the Demon Evo Plus is also supplied with a ‘Protected by Datatool’ decal to highlight to potential thieves that security is installed.